|Laser type||Semiconductor laser|
|Output Mode||pulse output|
|Control Method||Touch control|
|Screen Size||10.4 Inch|
|Energy density||10~70J/cm2 (Deviation≤±2%)|
|Pulse width range||1-400ms|
|Light spot surface temperature||0-30°C|
|Cooling System||Semiconductor+built-in water+Air Cooling triple cooling systems|
|Power||AC220V±10% 10A 50HZ , 110v±10% 10A 60HZ|
1.Germany "Dilas" laser bar , 600W handle
2. Top Semiconductor + Water + Wind tri cooling system .
3.Easy and humanized operation system . After pre treatment
2.Choose men /women , skin type
3.Choose treatment area , set parameter
Automatic detection : Water flow voclocity , flow capacity ,working
temperature . Error display when meet unnormal situation . Machine
works stable and safe .
Remove the unwanted hair on all parts of the body, such as
hairline, lip hair, whiskers, armpit hair, body hair, bikini hair
or any other unwanted hair
Semiconductor laser hair removal machine is freezing through
technological innovation, so that the treatment of head to negative
temperature, unlike other laser burns the skin, to better protect
the skin, hair follicle melanin by specific wavelength of laser
absorption, and the heat exchange to destroy hair follicle, the
laser energy can be shot down into the hair follicles within the
hair follicle is destroyed energy decomposition, so that the hair
follicles to stop growing, because the laser energy about 15% of
the skin can penetrate the dermis layer, the epidermis and more
with melanoma of the hair follicle deep through the heat damage to
hair follicle degeneration and atrophy; achieve permanent hair
Hair removal process?
1. Cut or shave hair to 1-2mm or ask patients to shave at home 2-3
days before treatment.
2. Clear treatment area.
3. Turn on machine, adjust the parameter, set it to ‘standby’ .
4. Put cooling gel on treatment area about 2mm.
5. Wear protect goggles for patient and operator.
6. Shot the treatment area, let the crystal tip to touch cooling
gel, You are permitted to have 1/3 overlapping on treatment area.
7. Wipe off cooling gel after treatment and clear treatment area
with cooling water. If patients feel warm or hot, you may put ice
bag on treatment area until heat disappear.
What is laser therapy and how does it work?
Lasers designed for permanent hair reduction emit wavelengths of
light that are absorbed by the pigment in the hair (melanin). If
the surrounding skin is lighter than the colour of the hair, the
energy of the laser is concentrated in the hair shaft (selective
phytothermalysis), effectively destroying it without affecting the
skin. Once the hair follicle is destroyed the hair growth activity
is permanently disabled.
Who suitable for Laser Hair Removal?
Both men and women seek laser hair removal to remove unwanted hair.
Laser hair removal is commonly done on the underarm, pubic area,
legs, abdomen, lip, chin, back, buttocks, thighs, face, neck,
chest, arms, and toes.
Laser technology works by targeting dark pigment. Therefore, it
works best on pale skin and dark coarse hair. The lighter the skin
and the darker and more coarse the hair, the better the results.
What is the difference between Laser and IPL?
IPL stands for ‘intense pulsed light’ and has some branded
variations such as SIPL, VPL, SPL which are all essentially the
same technology. IPL machines are not lasers. IPL devices are
generally cheaper than laser devices, which is why many clinics
choose to use them. These machines produce a wide bandwidth of
traditional light that can heat up all of the surrounding tissue.
IPL lacks laser's ability to produce a selective bandwidth of light
that will only affect the hair shaft making it less effective in
disabling hair and putting the skin at a higher risk for side
IPL generally requires more treatments (sometimes double or triple
the treatments) or may only reduce the thickness and darkness of
the hair, rather than eliminate it completely. Generally, true hair
removal lasers (i.e. Alexandrite, Diode, and ND:Yag types) tend to
achieve superior results for unwanted hair treatment.
What should the treatment be like?
Customer and therapist will wear safety glasses to protect eyes
from light during the procedure. The therapist will use a small
handpiece that touches your skin to deliver the light. Gels may be
applied before and after treatment and sunblock is generally
applied post treatment. Customer will be draped appropriately for
privacy, and lay on clean, soft disposable sheeting for hygiene and
How long does the treatment take?
Every treatment, like every patient, is unique. Most areas can be
treated in 5 to 15 minutes – depending on the surface area and head
applicator used. Nubway diode laser High Speed Laser applicator can
treat areas up to 75% faster than traditional lasers or
applicators, so you can expect faster and more efficient
How many treatments will the customer needed?
Hair grows in cycles and laser can treat hairs in the “Anagen” or
active growth stage. Since approximately 20% of hairs are in the
appropriate Anagen stage at any one time, at least 5 effective
treatments are necessary to disable most of the follicles in a
given area. Most people require 8 sessions, but more may be
required for the face, those with darker skin or hormonal
conditions, those with certain syndromes, and for those that have
waxed for many years or had IPL in the past (both affect follicle
health and growth cycles).
The hair growth cycle will slow throughout the laser course as
there is less blood flow and nourishment to the hair site. The
growth may slow to months or even years before new hairs show up.
This is why maintenance is required after the initial course. All
treatment results are individual.
Beijing Nubway S&T Co,Ltd is a factory for Laser and Light based beauty aesthetic equipment.
Main product included HIFUSHAPE focused untrasound hifu ,IPL SHR E-light machine,Cryolipolysis machine,diode Laser hair removal,spider vein/vascular removal,CO2 laser,nd yag laser tattoo removal, Oxygen facial intraceutical ,etc.
We have our own research and development departmentand our own factorys we can provide OEM and ODM service for the distributors all over
the world. In beauty equipment industry, our factory is one of the
biggest in China, it includes several production lines, Material
Library, shipping department, Inspection Area.
We highly control the manufacturing process and quality assurance .
1.2 years warranty, if there any problem happens with your machine, we will repair
it free of charge (except the intended damage)
2.Free training, user manual and operation video are available, also, if it is not
enough, we can provide the online face to face education
3.OEM/ODM services, your logo, outshape, language, interface can specially be designed on your machine
Pakage:Aluminum alloy case / wooden case
Shipping: DHL,TNT,UPS,FEDEX,EMS air in 5 days
Payment: Wire transfer; West Union ;Paypal ;
Hearty welcome to your visit .
Beijing Nubway S&T Co , Ltd
Mob / whatsapp: +86 18201458901
Skype : Cora Huang
Offcial : www.nubway.net
Address: Room 805, Huasheng International Mansion, Beijing, 10060