Automatic Double Cylinder Rebar Processing Machine For Forge Rebar
1. Product Description
HDCJ-32S automatic double-cylinder rebar upsetting machine is used
to enlarge the diameter of the rebar head with high pressure, then
make thread on it, which can make effective cross section of the
thread bigger than the base rebar. It can improve the quality of
the joint and make joint’s compression and tensile strength bigger
than the base rebar. The machine is used in high quality rebar
splicing of national projects such as bridge and subway.
The machine is easy to operate, with high quality and high speed,
and not effected by environment. It is used in the forgoing
processing of HRB335 and HRB400 rebar with diameter of 14-40mm.
Main Technical Parameter
Rebar of Φ16—Φ32
Three-phase four-wire 50HZ
68# hydraulic oil
After the mold is installed, reset the stroke limiting bracket.
Adjust the travel limit screw so that the stroke control in 15mm,
insert the test steel bar to the top of the mold center hole press
automation button. After the processing of the work-piece,
measurement it. If failed, then adjust stroke limit screw to make
the trip gradually increased, until processing of qualified
2- Safety operation rules
1. Workers have to be trained and tested OK then can work.
2. Before operation with rebar, first running the machine 2-3 mins
without processing, if it is running normally the process.
3. The feeding head of head should be plain and straight.
4. Before processing the rebar, the machine should be reset and
to ensure the same processing.
5. The processing rebar can not have the transverse cracks, when
the equipment break down should be eliminated timely.
6. Oil should be 68# hydraulic oil.
7. Workers should obey the safety rules
3- Machine Failure and Exclusion
|Trouble phenomenon||Reason||Method of exclusion|
|No action of cylinder||Motor reverse||Swap two-phase power supply|
|Electromagnetic spill valve failure||Replace the electromagnetic spill|
|Low oil level||Add hydraulic oil|
|Residual air in cylinder||Empty run 3-5min|
|The cylinder can only run in one direction or the oil cylinder
nonstop||Solenoid valve Cards||Find professional repair person|
|Die of steel||Die wear||Change mold|
|Small pressure||Professional Surge|
|Mold cracking||Too much pressure||Replacement of mold, professional regulator|
|Upsetting head is not full||Screw stroke wrong location||Adjustment|
3. Package & Delivery
Package: in wooden case
Delivery: 10-15 days after receiving the deposit.
4. Our Service
- Best price
- Quality assured
- Fast reply
- Satisfied after-sale service
Any request, just let me know.