Silicon Carbide Grit 150 Abrasive Sanding Belts With Antistatic
WEEM 1128 wide belt is built with heavy duty YY weight polyester
backing bond with close coated premium silicon carbide gains. WEEM
1128 wide belt is the best choice for Surface Finishing of MDF,
Particleboard and Plywood Panels and others.
WEEM 1128 is design with premium silicon carbide bonded on
anti-static treated YY weight waterproof polyester. Anti-static
treatment made on backing to delay or prevent loading problem.
Silicon carbide is a very hard and crystal structure produces a
fine straight edged grind lines. Care selection of gains, only
premium silicon carbide is selected. It is superior for its ability
to penetrate with light cutting pressures. SiC is primarily used
for grinding nonferrous materials such as brass, copper, bronze,
and wood, glass, rubber and plastics. It is also used to finish
polyurethanes, primers, lacquers and sealers.
A closed coat product has a higher number of abrasive cutting
points per square inch and results in higher stock removal rate and
longer time before the abrasive wears out. Normally results in a
A strong bi-direction tape splice is used. Joint of WEEM 1128 wide
sanding belts offer 4 types of joints
Tap on gain line joint: as default.
Tap on gain zizag joint:
Tap on butt line joint:
Tap on butt zizag joint:
Woodworking /MDF/HDF/OSD/Partial board/Chip board/Glass/metal
Yy weight waterproof polyester
Resin over resin
1000mm/39” ~ 1380mm/54”
It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma
etc. it offer great performance and durable with heavy duty
grinding and sanding needs.